To install the Bedair Machine Works
stainless steel guide rod the
factory main spring guide stop
has to be reamed out with a 7/32" drill bit (not supplied). The main spring guide stop is plastic and
is very easy to ream out with hand pressure only.
Thank you,
Steve
has to be reamed out with a 7/32" drill bit (not supplied). The main spring guide stop is plastic and
is very easy to ream out with hand pressure only.
Thank you,
Steve
Cx4 Storm Stainless Guide Rod
The main spring guide stop must be reamed to 7/32" to slide freely
on the stainless guide rod.
The main spring guide stop has to be enlarged with a 7/32" drill bit
and hand pressure. The main spring guide stop must slide freely on the rod.
Main spring guide stop is now sized properly.